

Turkish manufacturer outsourced production without your consent? Learn about unauthorized subcontracting, breach of contract, factory inspections, product defects, intellectual property risks, termination, refunds and compensation in Turkey.
A foreign company that discovers its Turkish supplier has subcontracted manufacturing to another factory without approval may face serious commercial, contractual, and intellectual property risks.
International manufacturing agreements frequently involve careful selection of suppliers based on production capacity, technical expertise, quality control systems, confidentiality standards, certifications, and manufacturing experience.
Foreign buyers may conduct factory audits, approve production facilities, review quality management systems, and negotiate detailed supply agreements before placing substantial orders.
The buyer may select a particular Turkish manufacturer because it possesses specialized machinery, qualified employees, approved production processes, or experience manufacturing regulated products.
However, disputes may arise when the supplier transfers all or part of the production to another company without informing the foreign buyer.
For example, a foreign clothing retailer may contract with a Turkish manufacturer after approving its factory and production standards. Several months later, the buyer may discover that the garments were manufactured at an unrelated facility that was never inspected.
In another case, an international machinery company may provide confidential technical drawings to a Turkish supplier for the production of customized industrial components. The supplier may then disclose the drawings to an unapproved subcontractor.
More serious situations may involve factories that lack required certifications, unauthorized substitution of raw materials, inferior workmanship, unsafe production conditions, disclosure of trade secrets, or manufacturing facilities that cannot satisfy the buyer’s technical requirements.
The foreign buyer may discover the unauthorized subcontracting during a factory inspection, through shipping documents, product labels, employee communications, or complaints from downstream customers.
The Turkish supplier may argue that subcontracting is a normal commercial practice, that the contract did not expressly prohibit outsourcing, or that the final products comply with the agreed specifications.
The buyer may respond that the manufacturer’s identity, approved facility, confidentiality obligations, and quality control procedures were essential elements of the agreement.
These circumstances raise important legal questions.
Can a Turkish supplier subcontract production without the foreign buyer’s approval? Does unauthorized subcontracting automatically constitute breach of contract? Can the buyer reject goods manufactured by an unapproved factory? Can the agreement be terminated? Can the buyer recover advance payments, inspection expenses, and compensation for defective products? Who is responsible if the subcontractor misuses confidential designs or fails to meet quality standards?
Under Turkish law, unauthorized subcontracting may constitute contractual nonperformance where the agreement requires buyer approval, restricts outsourcing, or makes performance by the selected manufacturer an essential obligation.
However, subcontracting is not automatically unlawful in every manufacturing relationship.
The legal consequences depend on the contract, governing law, nature of the manufacturing obligations, subcontractor’s activities, and resulting damage.
The Turkish Code of Obligations No. 6098 establishes important rules concerning contractual performance, nonperformance, auxiliary persons, damages, and termination.
Articles 112 and 116 may become particularly relevant.
Where the arrangement qualifies as a contract for work, Articles 470 and following may also require consideration.
For qualifying international sales of goods, the United Nations Convention on Contracts for the International Sale of Goods (CISG) may apply.
Article 35 establishes important conformity requirements.
Articles 45–52 regulate buyer remedies.
Articles 74–77 establish important rules concerning damages.
The Turkish Commercial Code No. 6102 may provide additional remedies where unauthorized subcontracting involves misuse of confidential information or unfair competition.
The Industrial Property Code No. 6769 may become relevant where the subcontractor uses protected designs, trademarks, or other industrial property rights without authorization.
This guide explains how foreign companies can investigate unauthorized subcontracting, enforce manufacturing agreements, protect confidential information, recover payments, and pursue commercial legal remedies in Turkey under the 2026 legal framework.
Potentially.
The answer depends on the manufacturing agreement and applicable law.
For example, a supply contract may expressly prohibit subcontracting without written consent.
Where such a restriction is valid and enforceable, unauthorized outsourcing may constitute breach.
However, another agreement may permit subcontracting.
The buyer must examine the contractual terms before determining whether the supplier acted unlawfully.
No.
Subcontracting is a common commercial practice.
Manufacturers may engage other businesses to perform particular production activities.
However, the arrangement must comply with contractual and statutory obligations.
For example, a supplier may be permitted to outsource packaging while remaining responsible for the final products.
The legal consequences depend on the agreement and circumstances.
Unauthorized subcontracting occurs where a supplier delegates or transfers manufacturing activities in violation of applicable contractual restrictions.
For example, the agreement may require all production to occur at an approved factory.
The supplier may instead use another facility without consent.
However, the buyer must establish the relevant restriction.
The mere involvement of another business does not automatically prove unauthorized subcontracting.
Potentially.
The contract may permit certain activities to be outsourced.
For example, a clothing manufacturer may use an external embroidery or printing company.
However, the agreement may require approval for specified processes.
The buyer should examine the contractual scope.
Not every subcontracted activity necessarily constitutes breach.
Potentially.
However, full outsourcing may create significant contractual concerns where the buyer selected the manufacturer for its particular capabilities.
For example, the supplier may contractually undertake to manufacture goods at its own facility.
Transferring all production to another company may violate that obligation.
The legal consequences depend on the agreement.
Potentially.
The manufacturer may operate multiple production facilities.
However, the contract may identify a specific approved factory.
For example, the buyer may have inspected one facility but not another.
The supplier must comply with the relevant production location requirements.
The legal consequences depend on the agreement.
Potentially.
However, an affiliated company is not automatically equivalent to the contracting manufacturer.
For example, the supplier may transfer production to a subsidiary.
The buyer may have approved only the original facility.
The contractual restrictions must be examined.
Separate corporate personality may also be relevant.
Potentially.
However, the relationship between the businesses does not automatically establish authorization.
For example, the supplier may outsource production to a factory owned by a relative.
The buyer may argue that the facility was never approved.
The legal consequences depend on the contract and actual production arrangements.
Potentially.
The contract may permit outsourcing to independent manufacturers.
However, the supplier may be required to obtain approval or ensure compliance with specified standards.
The buyer should examine the contractual requirements.
Unauthorized use of an independent subcontractor may constitute breach where the relevant conditions are satisfied.
Potentially.
Commercial practices may be relevant to interpreting the agreement.
However, industry practice does not automatically override an express contractual prohibition.
For example, the contract may require written approval for all subcontractors.
The supplier cannot automatically disregard that restriction by claiming outsourcing is customary.
The relevant legal framework must be examined.
Potentially.
Where the agreement contains no express restriction, the legal analysis may be more complicated.
For example, the nature of the obligation may require personal performance by the selected manufacturer.
Alternatively, the supplier may be permitted to use auxiliary persons.
The applicable law and contractual circumstances must be examined.
No.
The legal consequences depend on the nature of the obligation and applicable statutory framework.
For example, certain obligations may require personal performance because of the contractor’s particular skills or characteristics.
Other obligations may be performed through employees or subcontractors.
The contract must be legally classified.
Article 83 establishes an important general rule concerning performance by persons other than the debtor.
Unless the creditor has an interest in personal performance, the debtor is generally not required to perform personally.
However, the parties may agree otherwise.
For example, a buyer may require production by a particular manufacturer.
The contractual and statutory requirements must be examined.
Article 471 of the Turkish Code of Obligations establishes important duties concerning contractors under contracts for work.
The provision addresses performance with care and loyalty and relevant aspects of personal performance.
However, the legal consequences depend on the nature of the work and applicable conditions.
For example, a specialized manufacturing project may require particular technical expertise.
The contract must first be legally classified.
Potentially.
However, the applicable rules concerning personal performance and subcontracting must be examined.
For example, the contractor may be selected because of specialized skills.
The legal consequences may differ from a standardized manufacturing arrangement.
The buyer should identify the nature of the obligation.
Potentially.
The contract may require written consent.
For example, the agreement may prohibit subcontracting unless the buyer approves the proposed facility in writing.
The supplier must comply with the relevant requirement.
However, the legal consequences depend on the contract and applicable law.
Potentially.
However, the alleged approval must be established.
For example, the supplier may claim that the buyer authorized another factory during a telephone conversation.
The buyer may dispute that claim.
The contract may require written amendments or approvals.
The relevant evidence must be examined.
Yes, potentially.
Emails may establish that the buyer approved a particular subcontractor.
However, the scope of the approval must be examined.
For example, the buyer may approve subcontracting only for packaging.
That approval does not automatically authorize outsourcing of the entire manufacturing process.
Potentially.
Messages may contain discussions concerning production facilities or subcontractors.
However, authenticity and context must be examined.
A screenshot alone may not conclusively establish every relevant term.
The buyer should preserve communications lawfully.
Potentially.
The supplier may argue that the buyer knowingly accepted subcontracted production.
However, waiver must be established under the applicable legal framework.
For example, the buyer may have approved outsourcing for one order.
That does not automatically eliminate restrictions for future orders.
Potentially.
The supplier may argue that the subcontractor possesses equivalent technical capabilities.
However, technical equivalence does not automatically eliminate an express approval requirement.
For example, the contract may require production at a named facility.
The legal consequences depend on the agreement.
Potentially.
The supplier may argue that the goods satisfy all technical specifications.
However, contractual obligations may extend beyond final product quality.
For example, the agreement may require production at an approved factory.
The buyer may possess a separate claim concerning unauthorized subcontracting.
The legal consequences depend on the contract.
Potentially.
For example, the contract may expressly prohibit outsourcing because of confidentiality or regulatory concerns.
The supplier may nevertheless subcontract production.
Even if the goods are technically conforming, the manufacturer may have violated the contractual restriction.
However, the available remedies depend on the seriousness of the breach and applicable law.
Yes.
An unapproved factory may use different materials, equipment, or quality control procedures.
For example, the subcontractor may lack the machinery required to meet agreed tolerances.
However, unauthorized subcontracting does not automatically prove defective products.
The buyer should investigate actual conformity.
Potentially.
For example, the subcontractor may use raw materials different from those approved by the buyer.
The buyer may possess separate nonconformity claims.
However, the material difference must be established.
Technical testing may be necessary.
Potentially.
An unapproved facility may manufacture products outside agreed tolerances.
For example, machinery components may have incorrect dimensions.
The buyer may possess remedies concerning defective goods.
However, the technical deviation must be established.
Potentially.
The subcontractor may deliver fewer goods than ordered.
However, the buyer must establish the shortage and responsible contractual party.
The supplier may remain responsible under the applicable framework.
The relevant delivery records must be examined.
Potentially.
Outsourcing may disrupt production schedules.
For example, the subcontractor may fail to meet the agreed deadline.
The buyer may possess delay remedies.
However, the legal consequences depend on the contract and governing law.
Potentially.
An unapproved factory may lack required quality control procedures.
For example, electrical products may fail safety testing.
However, the buyer must establish the relevant technical or regulatory nonconformity.
The applicable product safety requirements must be examined.
Potentially.
Certificates may relate to the approved manufacturer or production facility.
For example, a certificate may not cover products manufactured elsewhere.
However, the legal consequences depend on the document and applicable requirements.
The buyer should verify the certificate’s scope.
Potentially.
Certain products or industries may require specified manufacturing controls or certifications.
However, the applicable requirements depend on the product and destination market.
The buyer should identify the relevant regulatory obligations.
The supplier’s responsibility depends on the contract and applicable law.
Potentially.
Customs documents may identify the manufacturer or origin of goods.
Unauthorized subcontracting may create discrepancies.
However, the legal consequences depend on the applicable customs rules.
The buyer should examine the relevant documents.
Potentially.
The country of origin depends on applicable customs origin rules rather than merely the contracting supplier’s location.
For example, production may occur at a different facility or involve different processing.
The buyer should examine the actual manufacturing activities.
The supplier cannot automatically determine origin solely through invoice wording.
Potentially.
Preferential origin documentation must comply with applicable rules.
For example, the buyer may rely on an origin certificate when importing goods.
The actual production arrangements may affect eligibility.
However, subcontracting does not automatically invalidate every origin document.
The relevant customs framework must be examined.
Yes, potentially.
The foreign buyer may provide proprietary designs or technical information to the contracting manufacturer.
The supplier may disclose those materials to an unapproved subcontractor.
The legal consequences depend on ownership, confidentiality obligations, and applicable intellectual property law.
The buyer should identify the relevant protected rights.
Potentially, where authorized.
However, the agreement may prohibit disclosure without consent.
For example, the buyer may provide confidential CAD files solely for production at the approved factory.
The supplier may share the files with another manufacturer.
Unauthorized disclosure may create contractual or other liability.
Not automatically.
The subcontractor’s rights depend on the relevant authorization and applicable intellectual property law.
For example, a subcontractor may receive technical drawings for a specific order.
Using those drawings for competing customers may exceed the permitted purpose.
The buyer must establish the relevant rights and conduct.
A subcontractor may attempt to register a design.
However, registration does not automatically establish lawful entitlement.
The Industrial Property Code No. 6769 establishes important rules concerning design ownership and protection.
The buyer may possess remedies where the statutory requirements are satisfied.
The relevant development and ownership records must be examined.
Not automatically.
Trademark use requires an appropriate legal basis.
For example, the subcontractor may be authorized to place the buyer’s trademark on goods manufactured for a specific order.
Unauthorized production or sale may create infringement concerns.
The relevant rights and permissions must be examined.
Potentially, but the legal consequences depend on the contract and intellectual property rights.
For example, the subcontractor may manufacture additional units using the buyer’s protected design.
Unauthorized sales may create contractual or intellectual property claims.
However, the buyer must establish the relevant legal basis.
Potentially.
However, the conduct may violate contractual confidentiality, exclusivity, or intellectual property rights.
For example, the subcontractor may use the buyer’s proprietary design for another customer.
The buyer must establish the protected information and relevant misuse.
The applicable legal framework must be examined.
Unauthorized disclosure may create serious legal concerns.
For example, the subcontractor may obtain confidential manufacturing formulas or technical processes.
The Turkish Commercial Code establishes relevant unfair competition protections.
Article 239 of the Turkish Penal Code may become relevant where the statutory elements concerning trade secrets are satisfied.
However, not every disclosure automatically constitutes a criminal offense.
Potentially.
The contracting supplier may remain responsible for performance of its obligations.
Article 116 of the Turkish Code of Obligations establishes important rules concerning liability for auxiliary persons.
However, the applicable conditions and contractual arrangements must be examined.
The supplier cannot automatically avoid liability merely by delegating performance.
Article 116 establishes important rules concerning responsibility for the acts of auxiliary persons used in performing obligations.
For example, a manufacturer may engage another factory to complete production.
The contracting manufacturer may face liability for qualifying conduct of the auxiliary person.
However, the statutory requirements and any applicable limitations must be examined.
Not automatically.
The subcontractor’s independent legal status does not necessarily eliminate the contracting supplier’s obligations.
For example, the supplier may remain responsible for delivering conforming goods.
The relevant contract and Article 116 may require consideration.
The legal consequences depend on the circumstances.
Not automatically.
The manufacturer may remain responsible for contractual delivery obligations.
Under the CISG, Article 79(2) establishes important rules concerning failure by third parties engaged to perform the contract.
However, the statutory conditions must be satisfied.
The supplier must establish any applicable exemption.
Not automatically.
The supplier may remain responsible for delivering goods that satisfy the agreement.
For example, Article 35 of the CISG establishes conformity requirements.
The use of a subcontractor does not automatically eliminate those obligations.
The buyer must establish the relevant nonconformity.
Not automatically.
The supplier may argue that the subcontractor’s insolvency prevented performance.
However, the legal consequences depend on the contract and applicable law.
Article 79 of the CISG may require consideration under specified circumstances.
The supplier must establish the relevant conditions.
Potentially.
However, the buyer may not have a direct contract with the subcontractor.
The available claims depend on the circumstances.
For example, separate intellectual property, tort, or unfair competition liability may arise.
The buyer must establish the relevant legal basis.
Potentially.
However, the legal basis for each claim may differ.
The supplier may face contractual liability.
The subcontractor may face separate liability where its own conduct violates applicable law.
The buyer must establish the relevant requirements against each party.
The same loss cannot automatically be recovered multiple times.
Potentially.
Where the supplier violates a valid contractual restriction, the buyer may seek performance or cessation of prohibited conduct.
However, the available remedy depends on the contract and governing law.
The buyer must establish the relevant obligation.
The court may also consider proportionality and third-party rights.
Potentially.
For example, the agreement may require manufacturing at a named facility.
The buyer may seek compliance with that obligation.
However, the availability of specific performance depends on the governing law and procedural framework.
The buyer must establish the relevant contractual requirements.
Potentially.
However, the legal consequences depend on the agreement and stage of production.
For example, the supplier may have already completed substantial work at the subcontractor’s facility.
The buyer may seek corrective performance.
The court or arbitral tribunal must examine the circumstances.
Potentially.
The contract may provide audit rights extending to subcontractors.
However, the buyer does not automatically possess unrestricted access to a third-party factory.
The supplier may be required to arrange inspection under the agreement.
The relevant contractual and procedural requirements must be examined.
Potentially.
The agreement may require disclosure of production facilities and subcontractors.
For example, the buyer may have a right to approve all manufacturing locations.
The supplier may be required to identify the subcontractor.
However, the legal consequences depend on the contract.
Potentially.
The buyer may possess contractual audit rights.
However, the subcontractor may not be directly bound by the buyer’s agreement.
Judicial document production procedures may become relevant.
The buyer must identify the relevant legal basis.
Potentially.
The contract may require inspection or testing.
For example, the buyer may request laboratory analysis to verify material composition.
However, the supplier’s obligations depend on the agreement.
The buyer should preserve representative samples.
Potentially.
However, rejection is not automatic.
For example, the contract may make production at an approved factory an essential condition.
Unauthorized subcontracting may constitute a serious breach.
Alternatively, the goods may be technically conforming and the breach may be less significant.
The applicable law and circumstances must be examined.
Potentially.
Article 25 of the CISG defines fundamental breach.
For example, unauthorized subcontracting may substantially deprive the buyer of the expected contractual benefit where production at an approved facility was essential.
However, the CISG’s application to the subcontracting obligation must be examined.
The statutory requirements must be satisfied.
Potentially.
The available termination rights depend on the contract and governing law.
For example, the agreement may expressly permit termination for unauthorized subcontracting.
Alternatively, the buyer may rely on statutory remedies where the breach is sufficiently serious.
The relevant notice and procedural requirements must be examined.
Potentially.
However, immediate termination requires a legally sufficient basis.
For example, unauthorized disclosure of confidential designs may constitute a serious breach.
The contract may provide an immediate termination right.
However, the buyer should not assume that every minor outsourcing violation permits immediate termination.
The answer depends on the contract and governing law.
Articles 117–126 of the Turkish Code of Obligations establish important rules concerning debtor default and related remedies.
For example, the buyer may need to provide an additional period for compliance.
However, additional time may not be required in every circumstance.
The statutory requirements must be examined.
Potentially.
For example, the supplier may stop outsourcing and return production to the approved facility.
However, the legal consequences depend on the breach and circumstances.
Where confidential information has already been disclosed, corrective measures may not eliminate every loss.
The buyer may retain qualifying damages claims.
Potentially.
The contract may make payment conditional on compliance with manufacturing requirements.
For example, the buyer may be required to pay only after successful factory inspection.
However, withholding payment without a valid legal basis may create additional liability.
The relevant contractual and statutory requirements must be examined.
Potentially.
The buyer may consider suspending new orders after discovering unauthorized subcontracting.
However, the agreement may contain minimum purchase commitments.
The buyer should examine whether suspension is legally justified.
Unlawful suspension may create additional liability.
Potentially.
Where the agreement is validly terminated or rescinded, restitution rights may arise.
For example, the buyer may have paid a substantial deposit for production at an approved facility.
The supplier may have outsourced production contrary to an essential contractual restriction.
However, recovery depends on the governing law and circumstances.
Potentially.
However, a full refund generally requires a legally sufficient basis.
For example, valid avoidance of the entire agreement may create restitution rights.
The buyer must establish the relevant statutory requirements.
Unauthorized subcontracting does not automatically entitle the buyer to repayment of every amount paid.
Potentially.
Where subcontracted goods fail to conform to the agreement, replacement may be available under the applicable law.
For example, Article 46(2) of the CISG permits replacement where the relevant requirements, including fundamental breach, are satisfied.
However, the buyer must establish the nonconformity.
Potentially.
Where subcontracted goods are defective, repair may be available under the applicable framework.
Article 46(3) of the CISG permits repair unless unreasonable in the circumstances.
However, the remedy depends on the nature of the goods.
The relevant statutory requirements must be satisfied.
Potentially.
Article 50 of the CISG establishes an important price reduction remedy concerning nonconforming goods.
However, unauthorized subcontracting alone does not automatically establish that the goods have reduced value.
The buyer must identify the relevant legal basis.
The statutory conditions must be satisfied.
Yes, where the applicable legal requirements are satisfied.
Article 112 of the Turkish Code of Obligations establishes important rules concerning liability for improper performance.
For example, unauthorized subcontracting may cause inspection expenses, defective goods, or delayed delivery.
However, the buyer must establish the relevant breach, damage, and causal connection.
Article 112 establishes the general framework concerning liability for failure to perform an obligation properly.
The debtor may be liable for resulting damage unless it establishes the relevant absence of fault under the statutory framework.
However, the claimant must establish the obligation, breach, damage, and causal connection.
For example, a supplier may violate a contractual prohibition on subcontracting.
The buyer must establish the resulting legally recoverable loss.
Potentially.
For example, the buyer may have paid to inspect the original factory before placing the order.
The supplier may subsequently outsource production.
However, the buyer must establish that the relevant expense constitutes recoverable damage.
The applicable contractual and statutory framework must be examined.
Potentially.
The buyer may need to inspect the unapproved subcontractor.
However, reimbursement depends on the applicable legal requirements.
The buyer must establish that the expenses were reasonable and caused by the breach.
The relevant invoices should be preserved.
Potentially.
Unauthorized subcontracting may require additional product testing.
For example, the buyer may need to verify material composition or safety compliance.
However, the buyer must establish the relevant expense and causal connection.
The testing should be appropriate and reasonable.
Potentially.
Where the contract is validly avoided under the CISG, Article 75 may become relevant to reasonable substitute transactions.
For example, the buyer may purchase conforming products from another manufacturer.
However, the statutory conditions must be satisfied.
The replacement purchase should be commercially reasonable.
Potentially.
The buyer may lose sales because of defective or delayed subcontracted production.
However, lost profits must be established.
Article 74 of the CISG may apply to qualifying international sales claims.
The claimant must establish the relevant causal connection and foreseeability.
Potentially.
The buyer may face penalties from downstream customers because of defective or delayed goods.
However, recovery from the Turkish supplier depends on the governing law and circumstances.
The buyer must establish the relevant contractual obligations and financial loss.
Not every penalty paid to a third party is automatically recoverable.
Potentially.
Products manufactured by an unapproved subcontractor may fail safety or quality requirements.
The buyer may need to withdraw goods from the market.
However, the applicable legal requirements depend on the product and destination country.
The buyer must establish the relevant costs and causal connection.
Potentially, but the legal requirements may be difficult to establish.
For example, defective subcontracted products may damage the buyer’s commercial reputation.
However, the claimant must identify legally recoverable damage.
General allegations of reputational harm do not automatically establish compensation.
Potentially.
Articles 179–182 of the Turkish Code of Obligations establish important rules concerning contractual penalties.
For example, the agreement may impose a penalty for unauthorized subcontracting.
However, the clause’s validity and enforceability must be examined.
The buyer must establish the relevant breach.
Potentially.
However, the available remedies depend on the agreement and applicable law.
The buyer cannot automatically recover overlapping amounts.
The court or arbitral tribunal must interpret the penalty clause.
The relevant statutory requirements must be satisfied.
Potentially.
Article 182 establishes important rules concerning contractual penalties.
However, Article 22 of the Turkish Commercial Code limits the ability of merchants to seek reduction of certain contractual penalties on grounds of excessiveness.
The legal consequences depend on the parties and circumstances.
The applicable framework must be examined.
Potentially.
Articles 54–63 of the Turkish Commercial Code establish important unfair competition protections.
For example, unauthorized use of confidential technical information may create unfair competition concerns.
However, ordinary contractual subcontracting violations do not automatically constitute unfair competition.
The claimant must establish the relevant statutory requirements.
Potentially.
The Industrial Property Code No. 6769 establishes important protections concerning registered and unregistered designs, trademarks, and other industrial property rights.
For example, a subcontractor may use the buyer’s protected design without authorization.
However, the buyer must establish the relevant rights and infringement.
The applicable statutory requirements must be satisfied.
Potentially, where the conduct satisfies the elements of a recognized criminal offense.
For example, a supplier may allegedly obtain payment through deliberate false representations concerning its manufacturing facilities.
Articles 157 and 158 of the Turkish Penal Code No. 5237 establish relevant fraud provisions.
However, ordinary contractual breach does not automatically constitute criminal fraud.
Potentially.
Article 239 of the Turkish Penal Code regulates specified conduct concerning trade secrets and confidential information.
For example, unauthorized disclosure of protected manufacturing information may raise criminal law questions.
However, the statutory elements must be established.
The buyer should distinguish contractual confidentiality claims from criminal proceedings.
Not automatically.
A criminal complaint concerns suspected criminal conduct.
Recovery of an advance payment may require separate commercial proceedings.
A criminal investigation does not automatically reverse bank transfers.
The buyer should examine the appropriate contractual remedies.
Potentially.
The CISG may govern qualifying international sales of goods.
However, a separate subcontracting restriction may require analysis under the governing domestic contract law.
For example, the CISG may apply to delivery and conformity obligations.
The subcontracting clause may involve broader manufacturing obligations.
The contract and applicable law must be examined.
Article 3 establishes important rules concerning contracts for goods to be manufactured or produced.
Such contracts may qualify as sales under the CISG, subject to the statutory conditions.
However, certain contracts involving substantial buyer-supplied materials or predominantly services may fall outside the Convention.
The agreement must be legally classified.
Article 35 establishes important conformity requirements concerning quantity, quality, description, and packaging.
For example, subcontracted goods may fail agreed technical specifications.
However, Article 35 does not automatically prohibit subcontracting.
The buyer must distinguish product nonconformity from a separate contractual outsourcing restriction.
Yes.
Article 6 permits parties to exclude the CISG or derogate from specified provisions under the Convention’s framework.
However, the exclusion must be established through the agreement and applicable interpretation rules.
A general choice of Turkish law does not necessarily exclude the CISG.
No.
The CISG forms part of the applicable legal framework in qualifying international sales.
A contractual choice of Turkish law does not automatically mean that domestic contract law replaces the CISG.
The parties may expressly exclude the Convention.
The relevant contractual wording must be examined.
Yes.
The Turkish Code of Obligations may govern subcontracting obligations where the applicable legal framework requires it.
Article 83 establishes important rules concerning performance by persons other than the debtor.
Article 112 establishes contractual liability principles.
Article 116 addresses responsibility for auxiliary persons.
Articles 117–126 regulate debtor default and related remedies.
The buyer should identify the governing law.
Potentially.
The competent court depends on the contract, jurisdiction agreement, and applicable procedural framework.
For example, a foreign buyer may bring a commercial claim before a competent Turkish commercial court where jurisdiction exists.
However, a valid arbitration agreement may require a different procedure.
The buyer should examine the dispute resolution clause.
Potentially.
However, the buyer must establish a legally sufficient claim against the subcontractor.
For example, intellectual property infringement or unfair competition may provide a separate basis.
The absence of a direct contract may affect contractual claims.
The relevant statutory requirements must be examined.
Potentially.
The legal consequences depend on the contract and applicable jurisdiction rules.
For example, the parties may have agreed on foreign court jurisdiction.
However, the enforceability of the clause must be examined.
The buyer should also consider whether a foreign judgment can be enforced against the supplier’s assets.
Potentially.
Arbitration may be available where the parties have a valid arbitration agreement.
For example, the manufacturing agreement may provide for arbitration concerning subcontracting disputes.
However, the buyer cannot automatically require arbitration without a legally sufficient basis.
The arbitration clause and procedural requirements must be examined.
Potentially.
However, a subcontractor that did not sign the arbitration agreement is not automatically bound by it.
The applicable arbitration law and circumstances must be examined.
For example, separate consent or another legally recognized basis may be necessary.
The buyer should distinguish claims against the supplier from claims against the subcontractor.
Potentially.
Turkey is a party to the New York Convention on the Recognition and Enforcement of Foreign Arbitral Awards.
Foreign arbitral awards may be recognized and enforced under the applicable framework.
However, the statutory requirements and possible refusal grounds must be examined.
The relevant enforcement procedure must be followed.
Potentially.
Law No. 5718 establishes important rules concerning recognition and enforcement of foreign judgments.
However, the statutory requirements must be satisfied.
For example, a foreign buyer may obtain a judgment requiring repayment or damages.
The buyer may then seek enforcement against the supplier’s assets in Turkey.
Potentially.
Articles 389 and following of the Turkish Code of Civil Procedure establish important rules concerning interim judicial protection.
For example, the buyer may seek measures preventing unauthorized use of confidential designs.
However, the court must examine the asserted right, urgency, and proportionality.
The requested measure must address a specific legal risk.
Potentially.
However, the court must establish a legally sufficient basis.
For example, protected intellectual property rights may justify specified interim measures.
A general allegation of unauthorized subcontracting does not automatically justify shutting down a third-party factory.
The requested measure must be proportionate.
Potentially.
Articles 400–405 of the Turkish Code of Civil Procedure establish mechanisms concerning preservation of evidence.
For example, the buyer may seek examination of products or manufacturing records where there is a legally sufficient risk of evidence loss.
However, the statutory requirements must be satisfied.
Evidence preservation is not an unrestricted discovery procedure.
Potentially.
Articles 219 and following of the Turkish Code of Civil Procedure establish important rules concerning documentary evidence.
A court may order production of relevant documents under the applicable conditions.
For example, subcontracting agreements may help establish the actual production arrangements.
The applicant must identify the documents and legal relevance.
Potentially.
Manufacturing records may help establish where goods were produced.
However, the buyer does not automatically possess unrestricted access to every factory record.
The court must examine relevance and confidentiality.
The applicable procedural requirements must be satisfied.
Potentially.
Export records may help identify the manufacturer or shipment details.
However, access to customs information is subject to applicable legal restrictions.
The buyer cannot automatically obtain every export declaration concerning the supplier.
The appropriate procedural mechanism must be examined.
Potentially.
Labels may identify a manufacturing facility or production code.
However, the supplier may dispute the interpretation.
The buyer should preserve original products and relevant documentation.
Additional evidence may be necessary.
Potentially.
Packaging may contain manufacturer information or production identifiers.
However, packaging alone may not conclusively establish the actual production location.
The buyer should examine the complete evidence.
Expert examination may be appropriate.
Potentially.
Serial numbers or batch codes may help trace production.
However, the buyer must establish the meaning of the identifiers.
The supplier may dispute the findings.
The relevant technical records should be preserved.
Potentially.
Photographs may show goods being manufactured at another facility.
However, authenticity and context must be examined.
The buyer should preserve original images where possible.
A photograph alone may not establish every contractual element.
Potentially.
Videos may document production activities or factory conditions.
However, the buyer must obtain and preserve recordings lawfully.
The evidentiary value depends on authenticity and completeness.
The supplier may challenge the context.
Yes, potentially.
Emails may contain admissions concerning production locations or subcontractor arrangements.
For example, the supplier may acknowledge that another factory completed the order.
The buyer should preserve the complete correspondence.
The court or arbitral tribunal must examine the context.
Potentially.
Messages may contain discussions concerning outsourcing or production facilities.
However, authenticity and context must be examined.
A screenshot alone may not conclusively establish every relevant fact.
The buyer should preserve communications lawfully.
Potentially.
Employees or other witnesses may possess information concerning production arrangements.
However, witness evidence must be obtained and evaluated under the applicable procedural rules.
The buyer should avoid unlawful collection of confidential information.
The court must assess credibility and relevance.
Potentially.
For example, the supplier may acknowledge that production was outsourced without approval.
Such a statement may provide important evidence.
However, the legal consequences depend on the contract and context.
The buyer must still establish the relevant contractual restriction.
Not automatically.
Acceptance may be relevant to the parties’ conduct.
However, it does not automatically eliminate every claim concerning unauthorized subcontracting.
The legal consequences depend on the contract and governing law.
The buyer should preserve evidence of any reservation of rights.
Not automatically.
Payment may establish that the buyer paid for the goods.
However, it does not automatically establish approval of undisclosed subcontracting.
The buyer may discover the outsourcing afterward.
The applicable legal requirements must be examined.
Potentially.
However, silence does not automatically establish consent in every case.
The legal consequences depend on the agreement and circumstances.
For example, the buyer may have been unaware of the subcontracting.
The supplier must establish the relevant defense.
The applicable limitation period depends on the legal basis and governing law.
For example, Article 146 of the Turkish Code of Obligations establishes a general ten-year limitation period unless another statutory period applies.
However, unfair competition, intellectual property, and other claims may involve different rules.
The buyer should identify the applicable deadline promptly.
Yes.
A foreign buyer may appoint a Turkish lawyer to assist with commercial litigation and related proceedings.
The applicable authorization and procedural requirements must be satisfied.
Where documents are executed abroad, authentication and translation requirements may arise.
The buyer’s physical absence from Turkey does not automatically prevent legal action.
Relevant evidence may include the manufacturing agreement, purchase order, subcontracting restrictions, factory approval records, inspection reports, technical specifications, approved samples, confidentiality agreements, design ownership documents, quality certificates, product labels, packaging, serial numbers, shipping documents, customs records, photographs, videos, emails, and WhatsApp messages.
The buyer should identify the exact subcontracting restriction.
The actual production location should be established.
Where confidential information was disclosed, the relevant access and authorization records may be important.
The buyer should also preserve evidence concerning product defects, delays, and financial losses.
As of November 2026, several legal frameworks may govern disputes involving Turkish manufacturers that subcontract production without buyer approval.
The Turkish Code of Obligations No. 6098 establishes important rules concerning contractual performance and nonperformance.
Article 83 establishes relevant principles concerning performance by persons other than the debtor.
Article 112 establishes the general framework for liability arising from improper performance.
Article 116 establishes important rules concerning responsibility for auxiliary persons.
Articles 117–126 regulate debtor default and related remedies.
Articles 179–182 establish important rules concerning contractual penalties.
Articles 470 and following regulate contracts for work.
Article 471 establishes important duties concerning contractors.
Article 146 establishes the general limitation period unless another statutory period applies.
The Turkish Commercial Code No. 6102 establishes important unfair competition protections.
Articles 54–63 regulate unfair competition.
Article 55 identifies specified categories of unfair competition conduct.
Article 56 establishes important civil remedies.
Article 22 establishes a relevant restriction concerning reduction of certain contractual penalties involving merchants.
The Industrial Property Code No. 6769 establishes important protections concerning trademarks, patents, designs, and other industrial property rights.
The United Nations Convention on Contracts for the International Sale of Goods may apply to qualifying international sales.
Article 3 establishes important rules concerning contracts for goods to be manufactured or produced.
Article 6 permits exclusion or modification of the Convention.
Article 25 defines fundamental breach.
Article 35 establishes conformity requirements.
Articles 45–52 establish important buyer remedies.
Article 46 addresses performance, replacement, and repair.
Article 49 governs avoidance by the buyer.
Article 50 establishes price reduction.
Articles 74–77 regulate damages and mitigation.
Article 79 establishes important rules concerning exemption from damages under specified conditions.
However, the application of the CISG to a separate subcontracting restriction must be assessed carefully.
The Turkish Code of Civil Procedure No. 6100 establishes important rules concerning documentary evidence, expert examination, interim judicial protection, and evidence preservation.
Articles 219 and following concern documentary evidence.
Articles 389 and following regulate interim injunctions.
Articles 400–405 regulate evidence preservation.
The Enforcement and Bankruptcy Law No. 2004 establishes relevant enforcement and precautionary attachment mechanisms.
Law No. 5718 establishes important rules concerning international jurisdiction, applicable law, and enforcement of foreign judgments.
The Turkish Penal Code No. 5237 may become relevant where the conduct satisfies the elements of fraud, trade secret disclosure, or another recognized offense.
The central legal distinction is whether the Turkish supplier was contractually permitted to subcontract production and whether the unauthorized arrangement caused a legally significant breach or recoverable damage.
Subcontracting is not automatically unlawful.
However, a manufacturer cannot disregard a valid approval requirement or confidentiality restriction merely because another factory can produce the goods more cheaply.
The available remedies depend on the agreement, governing law, and actual circumstances.
A foreign company that discovers unauthorized subcontracting by a Turkish supplier should first examine the manufacturing agreement.
The buyer should identify whether the contract prohibits outsourcing or requires written approval.
The next question is whether the supplier actually transferred production to another company.
The buyer should preserve factory approval records, inspection reports, shipping documents, product labels, and relevant communications.
Where the supplier claims that subcontracting was authorized, the alleged approval should be examined.
For example, the buyer may have approved only a limited production process.
The buyer should then determine whether the subcontracting affected product quality, delivery deadlines, regulatory compliance, or confidentiality.
Where the goods are defective, technical testing may be necessary.
Where proprietary designs were disclosed, intellectual property and trade secret protections should be examined.
The buyer should identify the appropriate contractual remedy.
For example, the agreement may permit termination for unauthorized subcontracting.
Alternatively, the buyer may seek corrective performance or compensation.
Where the breach is ongoing, interim judicial protection may require consideration.
Where evidence may be destroyed, judicial evidence preservation may be appropriate.
The buyer should calculate any financial losses, including additional inspections, laboratory testing, replacement purchases, delayed deliveries, customer penalties, and lost profits.
Where the supplier refuses to cooperate, the dispute resolution clause becomes important.
Commercial litigation, arbitration, interim injunctions, precautionary attachment, or enforcement proceedings may be available.
Lawyer Fırat Fesih Kaya emphasizes that unauthorized subcontracting disputes require careful distinction between contractual outsourcing restrictions, product conformity, auxiliary person liability, confidentiality, intellectual property, damages, and cross-border enforcement.
Unauthorized subcontracting may affect several legal interests simultaneously.
The contractual issue concerns whether outsourcing was permitted.
The manufacturing issue concerns production location, quality control, and technical compliance.
The liability issue concerns responsibility for subcontractor conduct.
The confidentiality issue concerns disclosure of proprietary information.
The intellectual property issue concerns unauthorized use of designs, trademarks, and technical drawings.
The regulatory issue concerns product safety, certifications, and origin documentation.
The financial issue concerns refunds, additional expenses, and lost profits.
The procedural issue concerns evidence preservation, injunctions, and litigation deadlines.
The international issue concerns governing law, jurisdiction, arbitration, and enforcement.
These matters have different legal requirements.
A foreign buyer cannot automatically reject every product merely because a Turkish supplier used a subcontractor.
However, a supplier cannot assume that outsourcing is always permitted when the agreement requires production at an approved facility or restricts disclosure of confidential information.
A coordinated legal assessment may therefore be necessary to protect the foreign buyer’s commercial investment and contractual rights.
1. Can a Turkish manufacturer subcontract production without buyer approval?
Potentially. The answer depends on the contract and applicable law. Unauthorized outsourcing may constitute breach where approval is required.
2. Is subcontracting automatically illegal under Turkish law?
No. Subcontracting is generally a lawful commercial practice, but contractual restrictions and statutory obligations must be respected.
3. Can a foreign buyer reject goods manufactured by an unapproved subcontractor?
Potentially. The available remedy depends on the contract, seriousness of the breach, and applicable law.
4. Can the buyer terminate the manufacturing agreement?
Potentially. Termination requires a valid contractual or statutory basis.
5. Can the buyer recover an advance payment?
Potentially. Valid termination or rescission may create restitution rights under the applicable legal framework.
6. Is the Turkish supplier responsible for the subcontractor’s mistakes?
Potentially. Article 116 of the Turkish Code of Obligations establishes important rules concerning responsibility for auxiliary persons.
7. Can the buyer claim compensation for defective subcontracted goods?
Yes, where the applicable legal requirements are satisfied and recoverable damage is established.
8. Can the buyer stop unauthorized use of confidential designs?
Potentially. Contractual, unfair competition, and intellectual property remedies may be available.
9. Can a foreign buyer sue the Turkish supplier in Turkey?
Potentially. The competent forum depends on the contract, jurisdiction rules, and any valid arbitration agreement.
10. Can a foreign buyer pursue the dispute without traveling to Turkey?
Yes. A foreign buyer may appoint a Turkish lawyer to assist with commercial proceedings, subject to applicable authorization and procedural requirements.
Protecting international manufacturing contracts, confidential business information and buyer rights requires timely and specialized legal assistance.
Foreign companies that discover Turkish suppliers have subcontracted production without approval may face serious risks involving defective goods, unauthorized factories, inferior materials, delayed shipments, disclosure of proprietary designs, regulatory noncompliance, and substantial financial losses.
Working with a lawyer experienced in Turkish commercial law, international manufacturing agreements, subcontracting liability, contractual nonperformance, intellectual property protection, arbitration, and foreign buyer disputes can help clarify the applicable legal framework and identify appropriate remedies.
Serving clients throughout Turkey and internationally, Fırat Fesih Kaya Law Office provides professional legal support in unauthorized subcontracting disputes, manufacturing contract enforcement, breach of contract claims, advance payment recovery, compensation litigation, trade secret protection, intellectual property disputes, interim injunctions, evidence preservation, precautionary attachment, arbitration, and enforcement proceedings against Turkish suppliers.
Lawyer Fırat Fesih Kaya assists foreign buyers, international distributors, importers, manufacturers, wholesalers, retailers, and overseas businesses facing unauthorized outsourcing or contractual nonperformance by Turkish suppliers.
Call Now: +90 312 434 22 22
WhatsApp: +90 532 769 22 22
Email: info@firatfesihkaya.av.tr
Website: https://www.firatfesihkaya.av.tr
Disclaimer: This article is intended for general informational purposes only. To avoid any loss of legal rights, we recommend consulting your lawyer regarding the specific circumstances of your case.